Demonstrate the operation of the oxygen tank
What will be an ideal response?
When operating an oxygen tank, follow these steps:
1. When opening a new tank, use the attached wrench and open the seal to release a little oxygen to clear dust and debris from the valves.
2. Attach the regulator and flowmeter.
3. Open the regulator valve all the way and then turn it back one turn.
4. Adjust the flowmeter to the point at which it is releasing 4 to 6 liters of oxygen.
5. Check the face mask hose to make sure there are no twists or knots.
6. Place the mask over the patient’s face. Make sure the mask fits the patient with a good seal.
7. When oxygen therapy is completed, remove the face mask, turn the flowmeter to zero, and close the tank valve. Be sure to clean or to dispose of it.
You might also like to view...
Which of the following clinicians are commonly involved in the cardiac rehabilitation programs? 1. Nurse specialist 2. Cardiologist 3. Dietitian
a. 1 and 2 only b. 2 and 3 only c. 1 and 3 only d. 1, 2, and 3
Which patients are better suited for subacute rather than for acute care? 1. Those who no longer need diagnostics or invasive procedures 2. Those who have a determined course of treatment 3. Those who are recovering from an acute illness
a. 2 and 3 only b. 1 and 2 only c. 3 only d. 1, 2, and 3