Include the answers to the questions in Step 4.

What will be an ideal response?

```
Router2# show ip bgp neighbors
BGP neighbor is 10.0.4.1, remote AS 100, external link
Index 1, Offset 0, Mask 0x2
BGP version 4, remote router ID 10.0.4.1
BGP state = Established , table version = 4, up for 00:26:03
Last read 00:00:03, hold time is 180, keepalive interval is 60 seconds
Minimum time between advertisement runs is 30 seconds
Received 34 messages, 0 notifications, 0 in queue
Sent 35 messages, 0 notifications, 0 in queue
Prefix advertised 3, suppressed 0, withdrawn 0
Connections established 2; dropped 1
Last reset 00:26:24, due to Peer closed the session
2 accepted prefixes consume 64 bytes
0 history paths consume 0 bytes
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 10.0.4.2, Local port: 179
Foreign host: 10.0.4.1, Foreign port: 11002
Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes)
Event Timers (current time is 0x1B12D91F):
Timer Starts Wakeups Next
Retrans 32 0 0x0
TimeWait 0 0 0x0
AckHold 31 12 0x0
SendWnd 0 0 0x0
KeepAlive 0 0 0x0
GiveUp 0 0 0x0
PmtuAger 0 0 0x0
DeadWait 0 0 0x0
iss: 4184693178 snduna: 4184693839 sndnxt: 4184693839 sndwnd: 15724
irs: 213104538 rcvnxt: 213105199 rcvwnd: 15724 delrcvwnd: 660
SRTT: 310 ms, RTTO: 780 ms, RTV: 80 ms, KRTT: 0 ms
minRTT: 0 ms, maxRTT: 300 ms, ACK hold: 200 ms
Flags: passive open, nagle, gen tcbs
Datagrams (max data segment is 1460 bytes):
Rcvd: 52 (out of order: 0), with data: 31, total data bytes: 660
Sent: 44 (retransmit: 0), with data: 31, total data bytes: 660
BGP neighbor is 10.0.4.3, remote AS 300, external link
Index 2, Offset 0, Mask 0x4
BGP version 4, remote router ID 10.0.4.3
BGP state = Established , table version = 4, up for 00:22:21
Last read 00:00:21, hold time is 180, keepalive interval is 60 seconds
Minimum time between advertisement runs is 30 seconds
Received 27 messages, 0 notifications, 0 in queue
Sent 27 messages, 0 notifications, 0 in queue
Prefix advertised 2, suppressed 0, withdrawn 0
Connections established 1; dropped 0
Last reset 00:30:15, due to User reset
2 accepted prefixes consume 64 bytes
0 history paths consume 0 bytes
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 10.0.4.2, Local port: 179
Foreign host: 10.0.4.3, Foreign port: 11001
Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes)
Event Timers (current time is 0x1B12E236):
Timer Starts Wakeups Next
Retrans 27 0 0x0
TimeWait 0 0 0x0
AckHold 27 13 0x0
SendWnd 0 0 0x0
KeepAlive 0 0 0x0
GiveUp 0 0 0x0
PmtuAger 0 0 0x0
DeadWait 0 0 0x0
iss: 468049368 snduna: 468049953 sndnxt: 468049953 sndwnd: 15800
irs: 2942058857 rcvnxt: 2942059442 rcvwnd: 15800 delrcvwnd: 584
SRTT: 319 ms, RTTO: 941 ms, RTV: 151 ms, KRTT: 0 ms
minRTT: 4 ms, maxRTT: 300 ms, ACK hold: 200 ms
Flags: passive open, nagle, gen tcbs
Datagrams (max data segment is 1460 bytes):
Rcvd: 45 (out of order: 0), with data: 27, total data bytes: 584
Sent: 40 (retransmit: 0), with data: 26, total data bytes: 584
```

Computer Science & Information Technology

You might also like to view...

Match the following terms to their meanings:

I. algorithm II. bit III. byte IV. ASCII V. unicode A. code that uses up to 32-digit binary numbers B. code that uses up to 8-digit binary numbers C. each digit in a binary number D. an 8-digit binary number E. a procedure that a computer can follow to accomplish a task

Computer Science & Information Technology

At the bottom of the Animation Pane, a(n) ________ displays the number of seconds the animation takes to complete

Fill in the blank(s) with correct word

Computer Science & Information Technology