What is the procedure for determining fire flow using the graphical analysis method?
What will be an ideal response?
Determine which gpm (L/min) scale should be used.
Locate and plot static pressure on vertical scale at 0 gpm (0 L/min).
Locate total water flow measured during test on chart.
Locate residual pressure noted during test on chart.
Plot residual pressure above total water flow measured.
Draw straight line from static pressure point through residual pressure point on water-flow scale.
Read gpm (L/min) available at 20 psi (140 kPa) and record the figure; this reading represents total available water.
You might also like to view...
Which of the following best defines "workup"?
a. Documentation of any ordered or requested diagnostic testing to identify the final diagnosis b. Documentation that reflects the physician's familiarity or unfamiliarity with the patient's presenting problem c. Documentation of any existing or initiated method of treatment, care, or management of the presenting problem; could range from getting a little rest, to having an invasive medical procedure d. Documentation of the patient's willingness or reluctance to participate in the E/M service visit
Factors occurring during childbirth that indicate possible complications in newborns are called _______________ factors
Fill in the blank(s) with correct word