The Canadian Occupational Performance Measure (COPM) __________
A. Is not client based
B. Is a standardized cognitive assessment
C. Is used for process objective assessment
D. Can be used only as a pretest
E. Is a criterion-referenced outcome measure
ANS: E
The COPM is client-based, not a cognitive assessment. It is used for measurement of outcome objectives and can be used as a pretest and post-test.
You might also like to view...
After properly attaching the AED to a pulseless patient and pressing the "analyze" button, the machine indicates "no shock advised." The most likely explanation for this is:
A) the patient is in cardiac arrest, but the rhythm causing it cannot be corrected with a shock. B) the AED has malfunctioned and you should proceed with CPR. C) the machine has detected that it would be dangerous to deliver a shock and you must check to make sure no one is in contact with the patient before analyzing again. D) the patient is not in cardiac arrest.
Which of the following statements regarding testing of fire alarm control panels (FACPs) is LEAST accurate? (479-480)
A. Warning lamps should light when detectors are triggered. B. The time stamp should clearly indicate the time of signal. C. Auxiliary devices must be restored to proper operation after testing. D. At least three complete rounds of printed signals should be visible at the end of testing.